The freezer section of any refrigerator like Sub-Zero is an extension in storing your groceries such as raw meat, leftovers, and even ice cream. You must set the freezer’s temperature properly to ensure that the food items you have stored in the section keep in quality for a certain period. However, there are some instances that you might face some problems with the freezer, such as temperature issues. To properly diagnose the problem, a freezer repair service expert will be able to assist you.
Sub-Zero Refrigerator Repair in Half Moon Bay is a repair service company that has been servicing the area for many years. A company with professionally trained repair technicians, licensed and authorized to work on Sub Zero appliances issues. No matter what issue it could be, this will be properly handled using the right tools and equipment designed for the repair.
If you are in another location, you can get the best and authorized repair service for Sub Zero appliances. Sub-Zero repair in Santa Monica has the best team of expert repair technicians and guarantees to provide you with the best repair service experience for your Sub Zero appliances. When repairing, a thorough assessment will be made to help determine what causes the issue, such as the gasket issue of the freezer, and apply the right solution to it.
If your freezer’s seal doesn’t seal properly, try to clean it before you decide to replace it. The food debris or dust can be present at the gasket’s grooves, preventing the freezer door from sealing tightly and evenly as it should be. If this doesn’t work, this will cause further problems with the unit, such as a frost build-up in the freezer.
Here’s how you can repair the freezer door seal.
- Clean the freezer door seal thoroughly by dripping the clean cloth in warm water and a dish detergent and scrubbing the seal. Make sure to clean the grooves and dry the seal with a dry cloth.
- Apply a light coat of the mineral oil to the door seal with a clean cloth. Always ally the grooves and the sides of the seal and remove the excess mineral with a clean cloth.
- Place a paper or dollar bill on the edge of the freezer door and close the freezer door. Pull the paper bill out of the door. If there is no resistance, the seal must be replaced.
- Pull the old freezer door seal away from the door to remove it.
- Position a new door seal over one of the corners on top of the door. Push the seal into place by pressing the lip of the new seal over its metal retaining around the door’s edge.
- Ensure to tighten the retainer screws slightly with the hex head nut driver. Close the freezer door to be able to test the new seal. Tighten its retainer screws fully if the seal functions as it should. Grab the seal and tug it into position if it doesn’t seal properly. Adjust the said manner until the seal already works properly, and tighten the retainer screws.