Sub Zero is one of the best and most reliable appliances, and they produce top-quality refrigeration systems for homes or commercial areas. One of the most used appliances many homes have is the Sub-Zero ice maker. Whenever you need a fresh batch of ice, you can easily get one with the help of your ice maker.
But, there will be a time that the ice maker won’t function as it should be. Although this can be disappointing, there are different ways to prevent this from happening. Suppose you have a refrigerator ice maker that always freezes up. This can be due to its not functioning components and other factors such as frozen fill tube, faulty water inlet valve, low freezer temperature setting, or the water filter that needs replacing.
Before troubleshooting the unit, make sure that the power is turned off. Then, locate the water supply to your ice maker and turn off the water supply through the shut-off valve. You may also need a bucket and towels for the remaining water in the water supply line.
Frozen Fill tube and Water Supply Line
The fill tube and water supply line supply the water to the ice maker. The fill can be a separate part that connects to the water supply, and it enters at the back of the freezer into the ice maker. You may need to move your ice maker to see the tube and check if it is frozen. If it is frozen, you will need to unfreeze it using hot water poured over the tube using a turkey baster or remove the part from the refrigerator and unfreeze it in the sink. Another method that you can use is the hairdryer to help unfreeze. But, be careful using the said method as dripping water and electricity can lead to possible electrical shock.
Replace the Water Filter
If you have a refrigerator water filter:
- Check if it needs a replacement, (consider replacing it).
- Reset filter on Sub-Zero ice maker to prevent any blockage.
Rest the Freezer Temperature
Also, check the temperature settings of your freezer as this might be set too low. You may want to change and set it up a degree or two.
Test the Water Inlet Valve
You may also want to consider testing the water inlet valve. The water inlet valve helps control the water flow into the ice maker, and it is located in the rear of the refrigerator behind the back access panel. There are times that this part can go bad and overfill the ice cube tray when it is not required. The water inlet valve also has a screen filter clogged with sediments and minerals from the hard water over time. Remove the water inlet valve from the unit and use a flat head screwdriver to remove the sediment screen from the part. Make sure to clean the screen using soap and warm water and replace it. Then, reassemble the parts and test the ice maker.
On the other hand, if the ice maker is still freezing up, it is highly recommended to call Sub Zero Refrigerator Repair to help you with the Sub Zero Ice Maker repair. Our team of professional and licensed technicians is professionally trained to handle any Sub Zero ice maker issues. We are also one of the known Sub Zero Appliance Repair in San Francisco. When we do the repair service, a thorough assessment is done to determine the main cause of the problem and to do the right fix using high-end tools and certified parts. We guarantee that any issues that you may encounter are properly handled to ensure that you will have your Sub Zero ice maker working in no time. Please feel free to call Sub Zero Refrigerator Repair anytime to learn more about the services.
Is Sub-Zero a good brand?
You may wonder, is the Sub Zero a good brand of appliance? Sub-Zero quality of appliance and craftsmanship is second to none. The components are best in class, and they do not compromise when developing and manufacturing new appliances. Sub-zero appliances are designed and tested to last for a long time. They also test every single unit in the factory before it is placed in a box to be ready and distributed in the market. If you are looking for a reliable and high-end refrigeration system, you can always count on Sub Zero.